- Mounted on ahorizontal air receiver together with the refrigeration air dryer, withpipework connected and pre-wired for fast, easy installation and commissioning
- System producedpursuant to CE standard, compact design for installation close to a wall with alow space requirement
- Colour Blue (RAL5015) and Grey (RAL 7021)
Compressor equipment
- Readyfor connection and use with all the required cooling, controlling andmonitoring equipment
- Sound-insulatedwith dirt-repellent casing and cooling air control system for an extremely lownoise level; base frame with vibration insulation
- Exhaustair system for the possible connection of an exhaust air duct
- Electricalcontrol cabinet (protection type IP 54) integrated in the noise reductioncabinet of the compressor for easy access to the electrical components
- Electricaldrive by means of a three-phase motor and transmission system with V-belts fora low maintenance drive unit with a long service life
- ALMiGintake controller with intake filter for a reliable, fully pressure-relievedstart and efficient low cost operation
- Oil injection-cooledcompressor stage offering high level of reliability
- Vertical oilseparation tank with large oil surface area for optimal initial separation
- Oil drain using ballvalve; large filling opening.
- External oilseparation cartridge for high compressed air quality with low residual oilcontent; can be replaced quickly without having to undo connections
- Oil and compressed aircooling by large area cooler
Compressor controller
- Star-delta contactor combination, control transformer, EmergencyStop button, plug-in electrical connections for low maintenance
- ALMiGAir Control Mini microprocessor controller with illuminated display for easyoperation
- Optimisedon-load/off-load controller taking into account the maximum permissible motorcycles
- Displayof all relevant status values and influential values
- Comprehensiveinherent protection with early warning and fault diagnosis for high reliabilityand availability
- Monitoring and safetysystem with shut-down system if the maximum final compression temperature isexceeded, the drive motor suffers a defect or excessive system pressure occurs
- Display of theremaining service life of the air filter, oil, oil filter and oil separationcartridge
- Restart can beprogrammed after a power failure
- Protection againstpower supply anomalies; monitoring for cable defects
Compressed air treatment
- Withintegral compressed air refrigeration dryer; the dryer is designed for apressure dew point of + 3 °C with dewpoint controlled by the Air Contolcontroller
- Withintegral particle and oil removal filters to remove solid particles ofless than 0.01 µm; the residual oil content in the compressed air is 0.01 mg/m³
- Withintegral condensate drain for the automatic condensate draining
Technical data
Type : COMBI 8
Maximum pressure : 10 bar
Delivery rate, per ISO 1217 annexC : 1.04 m³/min
Rated capacity ofdrive motor : 7.5 kW
Speed of drive motor : 2975 rpm
Protection type / ISOclass of drive motor : IP 55/F
Operating voltage : 400 V
Mains frequency : 50 Hz
Pressure dew point of drier : + 3 °C
Compressor cooling air deliveryrate : 1100 m³/h
Noise level (DIN45635 T.13) : 68 dB(A)
Reservoir capacity : 270 l
Width : 1120 mm
Depth : 685 mm
Height : 1680 mm
Weight : 435 kg
Compressed air connection : ¾”
brand | Almig Compressors |
---|